Good Place For Install Wine Glass Rack

Wine Glass Rack – It is always nice to go to a bar or restaurant and watch the wine glasses hanging neatly over your head. It makes you feel that everything is ready for you to sit down and have a drink. If you do not want to have to look for the wine glasses in a closet and you would like to have them hanging and ready for you, look at these suggestions.

Instructions: Support the two short wooden slats parallel to each other. This will create the base of the wine glass rack. Mark sections with 1.5 inches (3.81 cm) apart from each other with your pencil on each strip so you have seven sections on each strip. Put the longer slats on top of the marked wood, leaving an open section between each. You should have four slats with three openings. Drill pilot holes in the center of each end of the long strips and at the base. Screw each top rail into place using the wood screws.

Wine Glass Rack Under Cabinet

Put one of your wine glass rack in the internal space of the two external empty sections. It will overlap on both sides where it rests on the wood. Trace the contour of the glass in the wood. Do the same for the middle section, only at the other end. Cut the holes marked with your saw, cutting about 1/4 of an inch (0.635 cm) larger in each of the three marked circles.

Picture Gallery of the Good Place For Install Wine Glass Rack

Wine Glass Rack Under CabinetWine Glass Rack StainlessWine Glass Rack PopularWine Glass Rack MountedWine Glass Rack MetalWine Glass Rack IdeasWine Glass Rack HangWine Glass Rack DIYWine Glass Rack DesignWine Glass Rack DecorWine Glass Rack CabinetWine Glass Rack Build

Comments are closed.